Horizontal Seam Welder
Email this page Share
- Pressure mechanism: transfer pressure, even adjust the pressure between welding wheels and can compensate for electrode wear
- Weld wheel: installed internal / external water cooling, conductive block with pure silver tile structure, good electrical conductivity and automatic compensation for wear function
- Speed transmission mechanism:using frequency control / gear reducer transmission
- It has longitudinal seam welding, horizontal seam welding two forms, suitable for a variety of workpiece
| Model # | FN-50 | FN-75 | FN-100 | FN-150 | FN-200 |
|---|---|---|---|---|---|
| Rated Capacity(KVA) | 50 | 75 | 100 | 150 | 200 |
| Duty Cycle(%) | 50 | 50 | 50 | 50 | 50 |
| Power Voltage(V/HZ) | 380/50 | 380/50 | 380/50 | 380/50 | 380/50 |
| Secondary Voltage(V) | 5.2 | 7 | 8.6 | 11.8 | 14 |
| Maximum Short Circuit Current(KA) | 17 | 22 | 30 | 35 | 40 |
| Electrode Arm Extension Length(mm) | 520 | 520 | 520 | 600 | 600 |
| Electrode Working Stroke(mm) | 80 | 80 | 80 | 80 | 80 |
| Rated Electrode Pressure(N) | 4700 | 7300 | 7300 | 12000 | 12000 |
| Air pressure(Mpa) | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 |
| Flow of Cooling Water（L/min） | 15 | 25 | 25 | 30 | 30 |
| Cooling Water Pressure(Mpa) | 0.15-0.3 | 0.15-0.3 | 0.15-0.3 | 0.15-0.3 | 0.15-0.3 |
| Maximum Welding Thickness( low carbon steel mm) | 0.8+0.8 | 1.0+1.0 | 1.2+1.2 | 1.8+1.8 | 2.0+2.0 |
| COMPANY NAME | ||
| COUNTRY | ||
| NAME | ||
| PHONE | ||
| FAX | ||
| COMMENTS | ||